Menu Close

How are tie wires calculated?

How are tie wires calculated?

Estimate Binding Wires for Tying Rebars

  1. We use binding wires to tie the rebars.
  2. For rebar tie wire estimate apply thumb rules,
  3. Binding wires needed for 1 quintal (100 kg) of steel reinforcement = 0.9 to 1.3 kg.
  4. Binding wires needed for 1 ton (1000 kg) of steel reinforcement = 9 to 13 kg.

How thick is tie wire?

16.5-Gauge Rebar Tie Wire.

How many kg is a roll of tie wire?

25 KILOS
25 KILOS)

What gauge is rebar tie wire?

16.5-Gauge
16.5-Gauge Rebar Tie Wire.

Is code for binding wire?

The binding wire should be 16 or 18 gauge annealed wire conforming to IS 280. It shall be free from rust, oil, paint, grease, loose mill scale or any type. Highly stringent. Its tensile strength is half hard i.e. the Tensile Strength: 250-430 N/mm2.

What is tie wire?

Tying wire or tie wire is a strong yet pliable black annealed 16 gauge 1.6mm steel wire extensively used in construction for fixing steel reinforcing bars and mesh securely together in preparation for the concrete to be poured. Tying wire is also used to attach concrete and wire spacers.

How strong is rebar tie wire?

Tensile Strength: 300N/mm2 – 450N/mm2. Elongation: 15% – 17.5%. Length: 95m – 100m/spool; 50m – 200m/coil. Weight: 0.4kgs/spool; 1.13kg -1.36kg/coil.

What is the weight of tie wire?

Weight of G.I. wire Kg/Mtr

Guage Gms. mm Weight Kg.
8 4.064 0.103
10 3.251 0.066
12 2.641 0.045
14 2.032 0.026

How do I calculate the weight of a wire?

  1. Wire and Cable Metric Calculations. Dimensions.
  2. mils x 0.0254 = mm (millimeters) inches x 25.4 = mm.
  3. circular mils x 0.0005067 =mm2. (square millimeters)
  4. cu. in.
  5. pounds x 0.45359 = kg (kilograms) tons (2000 lb) x 0.907185 = t.
  6. lb/1000 ft. x 1.48816 = kg/km.
  7. mm2 x 8.89 = kg/km (for copper)
  8. °F to °C: °C = (°F minus 32) x 5/9.

What wire is used to tie rebar?

Rebar tie wire, also known as rebar tying wire, is made from the softest low carbon annealed steel wire. With fully galvanized and PVC coating on surface, it offers excellent flexibility and corrosion resistance mainly used for tying and bundling reinforcing steel bar, supporting plants in gardens.

How much does a roll tie wire cost?

Online Price: $351.74 / each. Available Inventory. 16 Gauge 3.5 Lb Roll Tie Wire. Fastenal Part No. (SKU) 63135. UNSPSC. 31152201. Manufacturer. Fastenal Approved Vendor.

What does a tie wire mean in construction?

Tie Wire. What is Tie Wire? Tie wire is a very pliable and durable steel wire, that is used by ironworkers to tie reinforcing steel together. The wire is either purchased in rolls that will attached to a dispenser worn on the belt of an ironworker, or as a small length of wire with an eye on both ends.

Where do you get wire for tie wire?

The wire is either purchased in rolls that will attached to a dispenser worn on the belt of an ironworker, or as a small length of wire with an eye on both ends.

What kind of steel is tie wire made of?

Made of black annealed carbon steel, this roll of tie wire is strong enough to bundle rods, pipe and lumber. No tool box should be without a roll. Some restrictions apply, login to see shipping methods.