Menu Close

How do you reset a Whirlpool Cabrio Platinum washer?

How do you reset a Whirlpool Cabrio Platinum washer?

Press the Start/Stop button once. Rotate the dial until Rinse, Wash, and Stop lights illuminate. Turn the washer off and unplug it for 10 seconds. Finally, turn on the washer and it should now be reset.

What does F mean on a Whirlpool Cabrio Platinum washer?

The single F error without additional letters, signs, or numbers indicates the failure of the control board. It cannot send messages to other units and systems. This error is caused by voltage drops in the home network, severe voltage surges, and short circuits.

What is the life expectancy of a Whirlpool Cabrio washer?

Eleven years
Eleven years is the average amount of use that you’ll get out of that brand spanking new $1,200 whirlpool cabrio topload washer before it gives up the ghost……. assuming you only wash 8 loads a week which is the avg number of loads per US household each week.

How do I reset my Whirlpool Cabrio touchscreen?

How to Reset Whirlpool Cabrio Washer “Option-1”

  1. Touch any key from the display pad to clear the error code or press Pause/Cancel key if possible.
  2. Choose another new cycle and press “Start” key to begin.
  3. Disconnect the power if the error returns.
  4. Wait 15 to 30 seconds and restore power.

Is there a reset button on a Whirlpool Cabrio washer?

Keeping this in consideration, is there a reset button on the Whirlpool Cabrio washer? Press the Start/Stop button once. Rotate the dial until Rinse, Wash, and Stop lights illuminate. Turn the washer off and unplug it for 10 seconds.

How to run a whirlpool Cabrio washer calibration cycle?

In order to run a Cabrio washer calibration cycle you will first have to enter the service diagnostics mode, just follow the directions step by step listed below. Make sure the washer is in (Stand By Mode) which means the machine is plugged in and all the indicator lights are off. Repeat this 3 button sequence 2 more times.

Is there a reset procedure for Whirlpool Cabrio?

Yes, there is a reset procedure to fix this. The Whirlpool Cabrio washers need to be reset in a different method than many other types and brands of washers. Here is how you can RESET your Cabrio washer (all Whirlpool Cabrio models).

How can I Reset my Cabrio washing machine?

Disconnect the Cabrio from power if the error or problem comes back. Wait 5 minutes before restoring power. Choose a new cycle and press “Start.” Run a test load empty to be sure the reset worked.

What happens when Whirlpool Cabrio washer enters diagnostic mode?

Once you do that it will enter diagnostic mode and you will know you have successfully entered diagnostics because all the led lights on the console will light up for 5 seconds and 88 will show in the time remaining display.

adplus-dvertising