Menu Close

How far do you insert SharkBite fittings?

How far do you insert SharkBite fittings?

SharkBite push-to-connect pipe insertion depth and pipe size compatibility.

SharkBite Fitting Size Nominal Pipe Size Pipe Insertion Depth (IN)
1 in. 1 in. CTS 1.31
1-1/4 in. 1-1/4 in. CTS 1.88
1-1/2 in. 1-1/2 in. CTS 2.05
2 in. 2 in. CTS 2.19

Do shark bite fittings leak?

SharkBite fittings are designed to create a leak-proof seal. When a SharkBite fitting does leak, the first thing you’ll want to do is see if the pipe is connected to the fitting correctly. By pressing in the cufflink, the steel teeth on the inside will release, and you’ll be able to pull your pipe out.

Do plumbers use shark bites?

Plumbers have used John Guest fittings for decades, but SharkBite fittings are newer to the market and their dependability is still under scrutiny.

Do shark bites ever leak?

SharkBite fittings can leak due to one of these reasons: The pipe was not properly deburred prior to installation. The pipe has scratches or debris on the outside that is preventing the O-ring from getting a watertight seal.

Do plumbers use SharkBite fittings?

SharkBite fittings have been used quite frequently by do-it-yourselfers in order to accomplish small plumbing tasks. Although they are more expensive than regular connections, the simplicity of pushing these pieces on rather than using solder makes for a hassle free installation.

What is the life expectancy of a SharkBite fitting?

How long do SharkBite fittings last? SharkBite fittings last a long time. In fact, SharkBite warrants the fittings for 25 years when used with SharkBite tubing.

Why does my SharkBite fitting leak?

A bad seal may be why your SharkBite fitting is leaking. SharkBite fittings are designed to create a leak-proof seal. When a SharkBite fitting does leak, the first thing you’ll want to do is see if the pipe is connected to the fitting correctly. By disconnecting and reconnecting the pipe, you may fix the problem.

How to install Sharkbite brass push to connect fittings?

How To Install SharkBite Brass Push-To-Connect Fittings Identify the pipe material. To get started, identify the pipe material. Cut pipe cleanly & squarely. Be sure the pipe is free of scratches or debris and cut the pipe as cleanly and squarely as possible. Measure & mark the insertion depth. Make the connection.

What do you use to disconnect a Sharkbite pipe?

To use the Disconnect Tongs, slide the tongs over the fitting and the pipe. Squeeze the tongs to press the fitting’s release collar and pull the pipe from the fitting. The SharkBite Universal brass push-to-connect fitting is ready to re-use. Using SharkBite is Fast, Efficient, and Reliable.

How do you install a Sharkbite fitting at Home Depot?

If using the SharkBite ®disconnect tongs, place the teeth around the fitting assembly. The fork end with the SharkBite® brand logo should be positioned around the tube and the other end around the neck of the fitting. 2. Push the clip against the release collar and pull the tube with a twisting action to release the tube.

What are the instructions for Sharkbite connection system?

The following instructions must be followed to assemble the SharkBite Connection System. Select the correct size fitting and tubing for the job. Check that fittings and tubing are clean, in good condition and are free from damage and foreign objects. Cut the tube so that the ends are square.