Contents
- 1 What is the fillet on a handrail?
- 2 What are the parts of a handrail called?
- 3 What is considered a graspable handrail?
- 4 What is standard handrail height?
- 5 What is the end of a handrail called?
- 6 Do I need a handrail for 3 steps?
- 7 What kind of balusters are used for plowed handrails?
- 8 What do you use to plow a stair railing?
What is the fillet on a handrail?
Fillet is decorative wood strips used to fill the plow between balusters in plowed handrail and shoerail.
What are the parts of a handrail called?
Parts of a Railing System
- Baluster. A baluster is a short and decorative post, pillar, or column in a series that supports the top rail.
- Balustrade. A balustrade is a railing supported by a series of balusters.
- Bottom Rail.
- Guardrail.
- Hinge.
- Landing.
- Lattice.
- Newel Posts.
Why do handrails have a fillet?
A fillet (or in-fill) is a small piece of wood that’s inserted into the underside of a grooved handrail between the spindles. The purpose of the fillets is to conceal the top of the spindles, whilst giving the appearance that there is no groove on the handrail.
What is considered a graspable handrail?
Definition: Graspability of a handrail refers to the ability to get a secure hold onto a handrailing whose purpose, after all, is both to guide a walker along a stair or other surface and to prevent or perhaps to interrupt slip trip and fall hazards.
What is standard handrail height?
(6) The height of handrails shall be not more than 37 inches (94 cm) nor less than 30 inches (76 cm) from the upper surface of the handrail to the surface of the tread, in line with the face of the riser at the forward edge of the tread.
What is the difference between handrail and banister?
As nouns the difference between handrail and banister is that handrail is a rail which can be held, such as on the side of a staircase, ramp or other walkway, and serving as a support or guard while banister is the handrail on the side of a staircase.
What is the end of a handrail called?
newel post
A newel post is the heavy, vertical post at the end or turn of a handrail. As opposed to a baluster, a new post is a structural component of a staircase which is attached directly to the floor or to the end of the stringer.
Do I need a handrail for 3 steps?
If your home has three or fewer steps, there’s no need to install a handrail. However, homes having four or more stairs must have a rail mounted on at least one side if the stairway is less than 44 inches wide. If one edge of the stairwell is open, that’s where the handrail must be.
What does it mean to plow a hand rail?
A handrail plow is basically a channel cut out of the bottom of the handrail and the top of the shoe rail that is the exact width of the stair balusters (or spindles) being used.
What kind of balusters are used for plowed handrails?
Square top wood balusters are generally installed using a plowed handrail with fillet system. Plowed handrail installation with fillet and square top wood balusters is a relatively easy method that makes assembly simple with a little skill and the right stair installation tools. Shop for Stair Fillet and Shoe Rail at the Best Prices!
What do you use to plow a stair railing?
It comes in 3’ lengths or longer and is very similar to a wood molding. These longer lengths are then precisely cut into small pieces to fill the plowed area between the wood balusters. Plowed handrail is also used to cap wrought iron stair railing system or a tempered glass balustrade. In these cases, custom sized plows may be required.
When to use shoerail or plowed handrail?
During installation, these balusters will be attached within this plowed groove to disguise any mounting materials, resulting in a clean, professional-quality finish. Shoerail is used to secure the bottom of your balusters to the floor or rake of the stairs.
