Menu Close

Where should a furnace be placed in a small house?

Where should a furnace be placed in a small house?

High-efficiency furnaces may be installed in basements, ground-floor utility rooms, garages or attics, in open spaces or confined closets. Always read the furnace manual and check local building codes for specific installation requirements, such as minimum distances from various types of walls.

How much space is needed around a gas furnace?

Typically for gas furnaces there must be a minimum of 24″ front accessibility to the furnace, and any access door or panel must have enough clearance space to permit removal of the largest component in the equipment.

Is it OK to put a furnace in the attic?

As long as the attic furnace is professionally installed, you can expect a more even heating distribution through your house. A furnace can suffer from a drop in energy efficiency if it’s in an unconditioned space, such as an attic. High-efficiency furnaces aren’t usually recommended for an attic.

What is code for furnace exhaust?

The exhaust vent terminal shall be located at least 3-feet above any forced air inlet located within 10-feet. The vent terminal shall be at least 12-inches below, 12-inches horizontally from, or 12-inches above, any door, window, or gravity air inlet into a building.

Does a furnace closet need ventilation?

Ventilating a closet is generally easy to do. Furnaces have their own supply and exhaust vents that need to be installed along with the unit. For safety, you need the required venting, but as long as you extend pipes to the roof or outside walls, you do not need to worry about the closet.

How much does it cost to install a gas furnace?

How Much Does it Cost to Install a New Furnace?

Furnace Type Average Unit Cost Average Installation Cost
Natural Gas Furnace Installation $1,825 $5,500
Propane Gas Furnace Installation $1,400 $3,750
Oil Furnace Installation $1,500 $4,000
Electric Furnace Installation $850 $3,000

What should you not put in a furnace room?

Do not store any cardboard boxes, cleaning materials, or chemicals anywhere in the room. Install smoke and carbon monoxide detectors. Purchase at least one fire extinguisher and make it easy to locate. Do not block the entrance to the room or the areas surrounding the furnace.

Can a furnace be in a closet?

The heat can safely escape if there is space around the furnace. Do not install your furnace in a storage closet. Any type of flammable material, including insulation, needs to be removed before installing the furnace.

Why would you put a furnace in the attic?

A furnace installed in the attic forces warm air to the bottom floor instead of letting it rise naturally, as it will from the basement. That may lead to higher energy bills and less efficiency. So Roth says if you go with an attic installation, choose a high-efficiency model.

What’s the average cost of a furnace with installation?

How Much Does a Furnace Cost? A new furnace costs $1,500 to $6,500, depending on the model you choose. The average cost of installing a mid-efficiency furnace is $1,500 to $2,500. Mid-efficiency furnaces have an annual fuel utilization efficiency (AFUE) rating of 80% to 89%.

Where is the best place to install a gas furnace?

Gas furnaces can be installed in confined spaces and unconfined spaces. Typical confined spaces are closets or attics. Unconfined spaces are garages, basements and utility rooms.

Can a gas furnace be installed in an unconfined space?

Gas furnaces can be installed in confined spaces and unconfined spaces. Typical confined spaces are closets or attics. Unconfined spaces are garages, basements and utility rooms. Most houses have one or more of each type of space.

Can a furnace be placed in a garage?

The only provision here is that the furnace should be elevated off the ground to protect it against potential basement flooding. Garages: Many furnaces are placed in garages. In many new builds, the garage is designed with a special “alcove” that holds the furnace without sacrificing space for parking vehicles.

How do you install a furnace in an attic?

Measure the distance from the existing gas pipe to the area above or below the closet to determine the amount of pipe needed. If the attic is a potential site for the furnace, determine the best location for a plywood furnace platform that has clear access to the roof above for the furnace’s exhaust vent.